HONOR BANNER COLOR

Unfair advantage.
"If you come expecting a fair fight, you are unprepared." This common saying among military and law enforcement professionals illustrates the core values and mindset that drive everything we do at Magpul. Our customer base encompasses a broad spectrum of users; everything from hobbyists and target shooters to the most specialized and highly trained military units in the world. Regardless of the end user or their mission, our goal is to design equipment with form, fit, and function far superior to that of your "standard issue" gear. In short, we want to give you an unfair advantage.

Easy is hard, hard is easy.
Unnecessary complexity and expensive construction are the hallmarks of mediocre design. It is almost always easier to design a product that is complicated, confusing, and expensive rather than simple, intuitive, and affordable. Although it is more difficult, Magpul has chosen to take the latter of these two approaches to product development.

From the onset of every project, Magpul uses a list of mission-driven requirements to dictate design, material construction, and manufacturing methods that will be most efficient without sacrificing quality or performance. The goal of the design itself is to be both simple and intuitive. By incorporating ergonomic considerations, a proper user interface, and subtle visual and tactile features, the product itself should actually instruct the user about its operation and function. Although every Magpul product comes with clear, concise installation and usage instructions, our aim is to design products so self-explanatory that instructions become unnecessary.

Magpul - 10 LR/SR GEN M3 PMAG
2014-12-25 01:32
USA CLIENTS ONLY The 7.62x51 NATO (.308 Winchester) PMAG 10 LR/SR GEN M3 brings GEN M3 technology to the smallest possible magazine size. Ideal for h
TGD-MAG290 SALE: $18.99 each
Magpul - 20 LR/SR GEN M3 PMAG
2014-12-23 11:41
USA CLIENTS ONLY The PMAG 20 LR/SR GEN M3 brings many of the M3 improvements to the 20-round 7.62 NATO/.308 Winchester SR-25 magazine form factor and
TGD-MAG291 SALE: $19.99 each
Magpul - 25 LR/SR GEN M3 Window PMAG
2014-12-23 00:31
USA CLIENTS ONLY The 7.62x51 NATO (.308 Winchester) PMAG 25 LR/SR GEN M3 Window is a lightweight, cost effective, high reliability magazine for SR25/
TGD-MAG292 SALE: $22.99 each
Magpul - 25 M118 LR/SR GEN M3 Window PMAG
2014-12-23 00:34
USA CLIENTS ONLY The 7.62x51 PMAG 25 M118 LR/SR GEN M3 Window is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifle
TGD-MAG577 SALE: $22.99 each
Magpul - 30 AK/AKM MOE PMAG
2014-12-25 01:34
USA CLIENTS ONLY The PMAG 30 AK/AKM MOE is a durable, lightweight, high reliability 30-round polymer magazine designed for Kalashnikov pattern rifles
TGD-MAG572 SALE: $13.99 each
Magpul - 30 AUS GEN M3 Window PMAG
2014-12-25 01:48
USA CLIENTS ONLY The PMAG 30 AUS GEN M3 Window is a 30-round 5.56x45 NATO polymer magazine for Steyr® AUG/F88/F90 compatible weapons that features t
TGD-MAG575 SALE: $19.99 each
Magpul - 30G MagLevel PMAG
2014-12-25 01:43
USA CLIENTS ONLY The PMAG 30G MagLevel (5.56x45 NATO) is a durable, lightweight, high reliability 30-round polymer magazine designed specifically for
TGD-MAG234 SALE: $27.99 each
Magpul - 5.56x45 GEN M2 MOE
2014-12-26 03:49
The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG 30 AR/M4 GEN M2 MOE, PMAG 30G, and EMAG™ that incorporates an integral
TGD-MAG212 SALE: $14.99 each
Magpul - 5.56x45 GEN M3 Ranger Floor Plate - 3 Pack
2014-12-26 03:51
3 PACK FLOOR PLATE The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG AR/M4 GEN M3 magazines that incorporates an integral
TGD-MAG561 SALE: $14.99 each
Magpul - 7.62x51 GEN M3
2014-12-26 03:53
The Magpul PMAG Ranger Plate is a floorplate replacement for the 7.62x51 PMAG LR/SR GEN M3 magazines that incorporates an integral loop similar to the
TGD-MAG564 SALE: $14.99 each
Magpul - ACS Commercial-Spec Model Carbine Stock
2014-12-27 01:42
The patented Magpul ACS (Adaptable Carbine/Storage) – Commercial-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using commercia
TGD-MAG371 SALE: $89.99 each
Magpul - ACS Mil-Spec Model Carbine Stock
2014-12-27 01:32
The patented Magpul ACS (Adaptable Carbine/Storage) – Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized r
TGD-MAG370 SALE: $89.99 each
Magpul - ACS-L Commercial-Spec Model Carbine Stock
2014-12-26 14:31
The Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M16 carbines using commercial-spec sized receiver exten
TGD-MAG379 SALE: $79.99 each
Magpul - ACS-L Mil-Spec Model Carbine Stock
2014-12-26 14:12
The Magpul ACS-L (Adaptable Carbine Stock - Light) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tu
TGD-MAG378 SALE: $79.99 each
Magpul - AFG Angled Fore Grip
2015-01-04 04:44
Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a
MPIMAG411 SALE: $34.99 each
Magpul - CTR Commercial-Spec Model Carbine Stock
2014-12-26 06:19
The Magpul CTR (Compact/Type Restricted) – Commercial-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using commercial-spec size
TGD-MAG311 SALE: $59.99 each
Magpul - CTR Mil-Spec Model Carbine Stock
2014-12-26 06:12
The Magpul CTR (Compact/Type Restricted) – Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver ext
TGD-MAG310 SALE: $59.99 each
Magpul - CTR/MOE 0.50" Cheek Riser
2014-12-29 05:12
Clip on cheek riser for the MOE and CTR stocks. Raises cheek weld 1/2 inch in height. This riser is for use on NON AR15/M4 applications as the riser w
TGD-MAG326 SALE: $19.99 each
Magpul - CTR/MOE 0.75" Cheek Riser
2014-12-29 05:15
Clip on cheek riser for the MOE and CTR stocks. Raises cheek weld 3/4 inch in height. This riser is for use on NON AR15/M4 applications as the riser w
TGD-MAG327 SALE: $19.99 each
Magpul - CTR®/MOE 0.25" Cheek Riser
2014-12-29 05:10
Clip on cheek riser for the MOE and CTR stocks. Raises cheek weld 1/4 inch in height. This riser is for use on NON AR15/M4 applications as the riser w
TGD-MAG325 SALE: $19.99 each