Latent Print Backing Cards, 3" x 5"
2014-08-20 02:27
Attach latent prints on the glossy side of our backing cards. The opposite side is non-glossy. Features pre-printed information for case informatio
Forensics Source Blue Squirrel No. 8 Brush
2014-08-20 02:42
Featuring more hair and a wider head than the Continental Squirrel Hair Brush, this long-handled brush uses only a select grade of fine squirrel hairs
Forensics Source Feather Duster
2014-08-20 21:22
These fluffy Marabou feather dusters are ideal for large areas, and are highly recommended for use with our Fluorescent Powders. Available in white, b
Forensics Source Mega Magnetic Wand
2014-08-20 21:34
This magnetic fingerprint powder applicator is designed for use with magnetic powder. The powder willform a cluster at the end of the applicator, and
Forensics Source Red Wand Magnetic Applicator
2014-08-20 21:53
This magnetic applicator is an alternative to larger applicators. Roughly the size of a pen or pencil. Small and lightweight Economical alternativ
Forensics Source The Breeze Single-Use Disposable Fiberglass Brush
2014-08-20 22:40
The Breeze™ Fiberglass Brush is a single-use, disposable latent print brush designed for use at crime scenes when cross-contamination is top concern
Forensics Source Zephyr Fiberglass Fingerprint Brush
2014-08-20 22:44
The Zephyr® Brush is the finest brush ever developed for use in fingerprint work. Has a long life Capacity to pick up and retain large amounts of
Forensics Source Aluminum Weighing Dishes, Pack of 100
2014-08-21 01:49
Accelerate the cyanoacrylate fuming process by placing a hot plate and aluminum dish inside the fuming chamber. Place five to ten drops of liquid glue
Forensics Source CA Remover, 32 oz.
2014-08-21 01:55
This non-flammable formula can be used to clean cyanoacrylate (CA) residues from glass, metal and Plexiglas® or acrylic surfaces. Simply apply the so
Forensics Source Liquid Glue, 1 oz.
2014-08-21 01:59
This generic-brand liquid glue is an economical alternative to our Hard Evidence™ Liquid Glue and an excellent alternative when doing large amounts
Forensics Source "The Hulk" Large Glue Cartridge
2014-08-21 02:04
The large “Hulk” cartridge emits fumes for one continuous hour or for ten 5-minute “burn” cycles. Adjustable burn cycles
Forensics Source Plain Glue Cartridges, Pack of 10
2014-08-21 02:08
This pack of cyanoacrylate glue cartridges are for use with the Fume-a-Wand cyanoacrylate fuming wand.
Forensics Source Fume-a-Wand Cyanoacrylate Fuming Kit w/ Butane
2014-08-21 02:12
Designed to simplify the cyanoacrylate fuming process, the Fume-a-Wand allows fumes to be directed onto any surface. Simply remove the safety cap, pla
Forensics Source Liquid Glue Hot Plate
2014-08-21 02:16
The hot plate features a large 7.6cm (3") diameter heating surface and the hot plate measures 11.4cm x 11.4cm x 1.3cm (41/2" x 41/2" x 1/2") and fits
Forensics Source 1,2 Indanedione Powder
2014-08-21 02:34
Used primarily on paper surfaces as an alternative to DFO, 1/2-Indanedione is a fluorescent latent print dye that is visualized at 520nm with filtrati
Forensics Source Ninhydrin Aerosol Spray, 6 oz.
2014-08-21 02:44
This is an aerosol formulation of Ninhydrin. Simply spray NIN-Print on the evidence you wish to process and allow it to air dry in a fume hood or unde
Forensics Source Ninhydrin Crystals
2014-08-21 02:51
Ninhydrin is one of the easiest and most effective methods for developing latent prints on paper. Many latent print examiners use Ninhydrin exclusivel
Forensics Source Ninhydrin Pump Spray, Methanol-Based, 8 oz.
2014-08-21 02:54
This pre-mixed Ninhydrin solution comes in a convenient pump spray bottle. The methanol-based mixture requires an additional surcharge to ship by air.
Forensics Source 3M Novec Engineered Fluid HFE-7100, Gallon
2014-08-21 02:59
Designed by 3M as a laboratory substitute for Freon (CFC-113), 3M Novec Engineered Fluid HFE-7100 is used as a carrier in a number of different latent
Forensics Source 3M Novec Engineered Fluid HFE-71DE, Gallon
2014-08-21 03:06
3M Novec Engineered Fluid HFE-71DE is used in conjunction with HFE-7100 in several alternative latent print development formulations, including formul
Forensics Source Photo-Flo, 16 oz.
2014-08-21 03:10
Kodak Photo-Flo 16 Oz.
Forensics Source Ardrox, 1 Quart
2014-08-21 03:17
Ardrox is a fluorescent liquid dye, which works well with lasers, forensic light sources and UV lamps. While Ardrox-developed prints fluoresce under 3
Forensics Source Basic Red 28, 10g
2014-08-21 03:27
Basic Red 28 is a fluorescent latent print dye used to stain cyanoacrylate developed latent prints. It can be used alone or mixed with Basic Yellow 40
Forensics Source Basic Yellow 40, 25g
2014-08-21 03:30
Basic Yellow 40 (Maxilon Flavine 10GFF) is a highly fluorescent dye stain which stains cyanoacrylate-developed latent prints. When illuminated with an
Forensics Source Basic Yellow 40, Pre-Mixed, 16 oz.
2014-08-21 03:35
Our pre-mixed Basic Yellow 40 contains no harmful solvents, gives off no irritating fumes and is non-flammable. It can be used after cyanoacrylate fum
Forensics Source CyanoBlue, 16 oz.
2014-08-21 03:39
CyanoBlue is a non-flammable, water-based cyanoacrylate dye which bonds rapidly to cyanoacrylate fumed latent prints, providing a highly bright fluore
Forensics Source Rhodamine 6G, 25g
2014-08-21 03:43
Rhodamine 6G is one of the best laser or forensic light source dyes available on the market. It is inexpensive, safe to use and a little goes a lon
Forensics Source Physical Developer
2014-08-21 04:02
This silver-based liquid reagent reacts with lipids, fats, oils and waxes present in fingerprint residue. The shelf life of the unmixed solution is
Forensics Source Sticky-Side Powder Kit
2014-08-21 04:12
The kit includes everything needed to mix and apply Sticky-side powder: One 50g (1.8oz.) jar of Sticky-Side Powder, one pint of Kodak Photo-Flo 200, a
Forensics Source Sticky-Side Powder, 50g
2014-08-21 05:47
Sticky-Side Powder, 50g (1.8oz.) for use with the Sticky-Side Powder Kit P/N 1/2723
Results 1 - 30 of 67