The latest upgraded edition of the Fenix E35UE delivers a surprising 1000 max lumens from only one 18560 Li-ion battery or two CR123A batteries. Dual side switches make for easy operation of the on/off and mode selection. Other industrial design features such as digitally regulated output and aircraft-grade aluminum makes this light an all-conditions solution for performance-minded owners.
Specifications
- SIZE:
- Length: 4.8” (122mm)
- Diameter: 0.9” (24mm)
- WEIGHT: 2.5 oz. (72g) excluding battery
- Batteries: One 18650 Li-ion battery or two CR123A batteries
- Included: Lanyard and spare o-ring
ANSI FL-1 RATING |
MODE |
OUTPUT LUMENS |
MAXIMUM RUNTIME |
MAXIMUM DISTANCE |
MAXIMUM INTENSITY |
IMPACT RESISTANCE |
WATERPROOF |
Eco |
8 |
150h |
Low |
50 |
42h 30min |
Medium |
150 |
11h 50min |
High |
450 |
4h |
Turbo |
1000 |
1h 50min |
|
525ft (160m) |
6400cd |
1m |
IPX-8, underwater 2m |
Additional Informations
- Utilizes Cree XM-L2 U2 LED with a lifespan of 50,000 hours
- Powered by one 18650 rechargeable Li-ion battery or two CR123A Lithium batteries
- 122mm length x 24mm diameter
- 72 grams (excluding battery)
- Dual side switch for fast and convenient operation
- Digitally regulated output maintains constant brightness
- Reverse polarity protection, to protect from improper battery installation
- Anti-roll and anti-slip body design
- Made of durable aircraft-grade aluminum
- Premium type Ⅲ hard-anodized anti-abrasive finish
- Toughened ultra-clear glass lens with anti-reflective coating
Support
OPERATION INSTRUCTIONS
Master Switch: controls General mode and output selection.
Auxiliary Switch: controls Strobe and SOS mode.
ON/OFF
With the light off, press and hold the master switch for 0.5 seconds to enter into General mode, press and hold the auxiliary switch for 0.5 seconds to enter into Strobe mode.
With the light on, press and hold the master or the auxiliary switch for 0.5 seconds to turn off the light.
Mode Switching
With the light on,
Single-click the master switch to enter into General mode,
Single-click the auxiliary switch to enter into Strobe mode.
Output Selection
In General mode, single-click the master switch to cycle through Eco→Low→Mid→High→Turbo;
Strobe and SOS
Single-click the auxiliary switch to enter into Strobe mode,
Another click the auxiliary switch to cycle through Strobe→SOS.
Lock-out Function
Lock: Simultaneously press the two switches for 3 seconds (when the light is unlocked), the light will blink twice at Low and then go out, the light is locked.
Unlock: Simultaneously press the two switches for 3 seconds (when the light is locked), the light will be unlocked and power on the last-used output level.
Note: In locked status, the light only responds unlocking operation, press on any switch, the light will blink twice at Low to remind the light is under locked status.
Intelligent Memory Circuit
The flashlight memorizes the last brightness level used in the General mode, the next time it is turned on, it will recall that previously used brightness level.
Over-heat Protection
The flashlight will accumulate a lot of heat when it is working at Turbo and High brightness level. When it works at Turbo for 5 minutes, the flashlight will automatically downshift to High output to prevent the light from overheating. If the Turbo output is needed, please reset it again. But the flashlight could be damaged or the normal service life could be shortened because of continuous use like this.